Compare Prices

Battery Charge Board


>
Battery Charge Board - Icstation TC4056A Micro USB 5V 1A 18650 Lithium Battery Charger Board with Over Charge Discharge Protection (Pack of 10)
Icstation TC4056A Micro USB 5V 1A 18650 Lithium Battery Charger Board with Over Charge Discharge Protection (Pack of

Battery Charge Board

Icstation mini Li-ion battery charger board set charging and battery overcharge overdischarge protection all in one practial for your DIY 18650 battery power supply to prolong its lifetime. On-board micro USB and soldering joints 5V input`port and charging status indicator ieal for single-cell lithium or multi-section parallel lithium battery. Specifications: Input Voltage: DC5V Charging Cut-off Voltage: 4.2V1% Maximum Charging Current: 1A Battery Over Discharge Protection Voltage: DC2.5V Battery Over Current Protection Current: 3A Board Size: 26 X 17mm/1.02 X 0.67inch(L*W) Package Included: 10X TC4056A Micro USB 5V 1A 18650 Lithium Battery Charger BoardNotice Please:1.when use this module at first time, there may be no voltage output between OUT+ and OUT-, it need connect the 5V power supply to active the circuit, When the battery disconnect with this module and connect it again also need this step. 2.When use the phone power adapter as the input power supply, it need the power adater output current is over 1A.3. If you have any question about products, application and delivery, please send us an email firstly, we will follow up in 12 hours during the business days, thank you!

  • Brand: IS
  • ASIN: B01LHD9D7E
Battery Charge Board - CHENBO 10 Pcs 5V Micro USB 1A 18650 TP4056 Lithium Battery Charging Board With Protection Charger Module
CHENBO 10 Pcs 5V Micro USB 1A 18650 TP4056 Lithium Battery Charging Board With Protection Charger

Battery Charge Board

Input voltage: 5V Charging cut-off voltage: 4.2V ± 1% Maximum charge current: 1000mA Battery over-discharge protection voltage: 2.5V Battery overcurrent protection current: 3A Board size: 2.6 * 1.7CM Note: The first time you access the battery, it may no voltage between the output OUT + and OUT-, then access 5V voltage charge your energy can activate the protection circuit, and the battery from the B + B-, then draw a line on the short open also need recharged to activate the protection circuit. Note that the charger must be able to output 1A or more to do when using a mobile phone charger input, or may not charge + MICRO USB female and next - pads for the power input, access 5V. B + positive then the lithium battery, B- then negative lithium batteries. OUT + and OUT- connected to the load, such as positive and negative electrodes connected mobile booster plate or other load. Package:10 pcs

  • Brand: CHENBO
  • ASIN: B06XCXPY86
Battery Charge Board - Otryad XT30 Plug 2S-6S 40A Lipo Battery Parallel Charging Board for IMAX B8,UN-A6 charger with XT60 Plug
Otryad XT30 Plug 2S-6S 40A Lipo Battery Parallel Charging Board for IMAX B8,UN-A6 charger with XT60

Battery Charge Board

Description: Product Name: XT30 Parallel Charging Board Balance Output Cable: 22AWG silicon cable Main Output Cable: 12AWG high quality silicon cable Compatible for IMAX B8,UN-A6 charger Support 6 pairs 2S,6 pairs 3S,6 pairs 4S,6 pairs 5S,6 pairs 6S balance charge Specifications: Color: black Model Number: V2 Size: 138x67x15mm Connector: XT60 Package Included: 1 x XT30 Parallel Charging Board 1 x Cable set 1 x Manual

  • Color: With Xt60 Plug
  • Brand: Otryad
  • ASIN: B07DC4Q2SM
  • UPC: 798863939574
Battery Charge Board - Onyehn 5Pcs 5V Boost Step Up Power Supply Module Lithium Battery Charge Protection Board 134N3P DIY Charger LED Display USB and Micro Port 5 Pack
Onyehn 5Pcs 5V Boost Step Up Power Supply Module Lithium Battery Charge Protection Board 134N3P DIY Charger LED Display USB and Micro Port 5

Battery Charge Board

Overview 134n3p is a single-chip solution designed for mobile power supply. It integrates a charge management module, a discharge management module, a power detection and LED indication module, and a protection module. The 134N3P has a built-in charge and discharge power MOS, and the charge current can be set. Z large charge current and Z large discharge current 1A. 134N3P integrates almost all safety functions such as constant temperature charging mode, over-temperature protection, over-charge and over-discharge protection, output over-voltage protection, output overload protection, and output short-circuit protection. In order to ensure the safety of the chip and lithium-ion battery, the 134N3P application circuit is simple, and only a few components are needed to achieve charge management and discharge management. Specificaitons: Input Voltage: 3.7V~5.5V Charging Current: Z 1A Output Current: Z is 1A Output Voltage: 5V BAT Discharge Termination Voltage: 2.9V Preset 4.2V Charge Voltage with 1% accuracy Discharge Efficiency: 85% (input 3.7V, output 5V/1A) Package Included: 5 X 5V Lithium Battery Charge Protection Board

  • Brand: Onyehn
  • ASIN: B07D3SQYKJ
Battery Charge Board - Favrison XT30 Plug 2S-6S 40A Lipo Battery Parallel Charging Board Battery Power Chager with Banana Plug
Favrison XT30 Plug 2S-6S 40A Lipo Battery Parallel Charging Board Battery Power Chager with Banana

Battery Charge Board

Features: Thicken PCB copper foil, allow security using 40A charging current Accelerates battery charging,the same time more battery charges Add cascade port,can be infinite cascading expansion of the charging port This ParaBoard can be used for batteries with JST-XH type balance plug (the most popular type in the market) and XT30 connectors. Description: Item Name: XT30 Parallel Charging Board Balance Output Cable: 22AWG silicon cable Main Output Cable: 12AWG high quality silicon cable Compatible for IMAX B8,UN-A6 charger Support 6 pairs 2S,6 pairs 3S,6 pairs 4S,6 pairs 5S,6 pairs 6S balance charge Specifications: Brand Name: none Model Number: V2 Size: 137x67x15mm Color: black Connector: Bullet Banana Plug Package Included: 1 x XT30 Plug Parallel Charging Board 1 x Cable set 1 x Manual

  • Color: XT30 Charger with Banana Plug
  • Brand: Favrison
  • ASIN: B078HQ6FZ8
  • UPC: 671423078558
Battery Charge Board - XCSOURCE 10pcs 1A 5V Micro USB TP4056 Lithium Battery Power Charger Board Module TE585
XCSOURCE 10pcs 1A 5V Micro USB TP4056 Lithium Battery Power Charger Board Module

Battery Charge Board

Features: With a Micro USB port, can be charging rechargeable lithium battery directly as a phone charger. Retains voltage input wiring pads, convenient for DIY. This module can charge for single-cell lithium battery or multi-section parallelled lithium batteries, can be powered by USB ports. With LED indicators, easily read the charging status. Specifications: Input Voltage: 5V Full charging voltage: 4.2V Max output current: 1A Power Indicator: Red for charging, Green for fully charged. Input interface: Micro USB Charging Precision: 1.5% Operating Temperature: -10 ° C ~ +85 ° C Item Size: Approx. 25 x 19mm. It can be used for voltage 3.6, 3.7V, etc. 18650, polymer and other lithium battery charge and discharge protection. Current Regulation: RPROG(k) - IBAT(mA) 30k - 50mA 20k - 70mA 10k - 130mA 5k - 250mA 4k - 300mA 3k - 400mA 2k - 580mA 1.66k - 690mA 1.5k - 780mA 1.33k - 900mA 1.2k - 1000mA Cautions: 1. Please make sure the battery is well connected. 2. Please do not connect the output reversely, otherwise it may burn the chip. 3. The connection wire should not be too thin or too long. 4. Current meter can only be connected with the module in series with 5V input. 5. Charging current is better to be 37% of the battery capacity. If you want to charge a battery of 1000mAh, 400m...

  • Brand: XCSOURCE
  • ASIN: B01LZSC7I8
Battery Charge Board - Icstation 11.1V 12.6V 20A 3S Lithium Battery Protection PCB BMS Board for 18650 18550 Li-ion Lipo Battery Cell Pack (Pack of 5)
Icstation 11.1V 12.6V 20A 3S Lithium Battery Protection PCB BMS Board for 18650 18550 Li-ion Lipo Battery Cell Pack (Pack of

Battery Charge Board

This lithium ion battery protection board is fit for 3 series 11.1V 12.6V lipo battery pack with over charging, over discharging, over current and short circuit protection. It is perfect for li-ion lipo battery cell pack such as 18650,18550, 14500 avoiding the damage during charging or discharge then prolong their lifetime. Specifications: PCB size: 59 X 20 X 3.4mm/2.32 X 0.79 X 0.13inch(L*W*H) overcharge protection voltage: 4.25v±0.05v Overcharge Recovery Voltage:4.1V-4.2V(4.16V typical)Over-discharge protection voltage: 2.5v±0.2vOverdischarge Recovery Voltage:3.2V±0.1v Continuous Working Current: 20AOvercurrent Protection Current: 40A±3A Charging Voltage: 12.6-13V Package Included: 5X 11.1V 12.6V 20A 3S 18650 Lithium Battery Protection BoardNote: 1.This board is compatible with 40A start-up current and 60W electric drill or below type. 2. When connect with the brush motor type loads, need to connect the capacitor(10uF-1000uF) to the motor in parallel connection to avoide the motor's reverse spike voltage damage the board.

  • Brand: IS
  • ASIN: B0751K9SV6
Battery Charge Board - WINGONEER Charge Control Module 12-24V Battery Protection Board for Lead Acid Battery and Lithium Battery
WINGONEER Charge Control Module 12-24V Battery Protection Board for Lead Acid Battery and Lithium

Battery Charge Board

WINGONEER® trademark Reg.NO:4747611WINGONEER Charge Control Module 12-24V Battery Protection Board for Lead Acid Battery and Lithium BatteryProduct Introduction:1.Input Voltage:DC 10-30V 2.Display Precision:0.1V 3.Control Precision:0.1V 4.Output Type:direct output 5.Voltage Tolerance:+/-0.1V 6.Application Fields:12-24V storage battery 7.Size:82x58x18mmUsing Method:1.Set Starting Voltage:in normal display voltage state,press the button will display start charging voltage;long press for 3s the digital tube will flash;you can start or stop button to set starting up charge voltage value 2.Set Stop Voltage:in normal display voltage state,press the button will display stoping charge voltage;long press the button for 3s the digital tube will flash;you can start or stop button to set stoping charge voltage value3.Factory Reset:in power on state press the start/stop button at the same time,digital tube will display 888;that represents factory reset settings Package Included:1X WINGONEER Battery Charge Protection Board

  • Brand: WINGONEER
  • ASIN: B07195NGXZ
  • UPC: 723466641302
Battery Charge Board - nidici XT60 Lipo Battery Charger 2-6S Parallel Balanced Charging Board Charging Plate for Imax B6AC 720i Lithium Batteries Charger Part
nidici XT60 Lipo Battery Charger 2-6S Parallel Balanced Charging Board Charging Plate for Imax B6AC 720i Lithium Batteries Charger

Battery Charge Board

2-6s XT60 Parallel charging board, with 2 XT60 Female to Deans T Plug Male Connector Specification: Connector: 6 XT60; 1 T-Plug Max current: 30A Cell: 2~6S Battery: 6 packs (same discharge state andamp; cell count) Voltage: 0~22.2VDC USE STEPS 1. Connect the both sides of a balance cable respectively to the balance port of the balance charger and parallel charging board. 2. Connect the power port of Parallel charging board to the output port of balance charger 3. Connect batteries to the board. Plug the balance heads firstly, and then connect them to the batteries' outputs. Package Includes: 1 x 2-6s Parallel charging board (6 XT60 and 1 T-Plug) 1 x Connect Cable 1 x User Manual

  • Brand: NIDICI
  • ASIN: B075GHLF8X
  • UPC: 614823507945

Battery Charge Board A488 Search Results

Looking for more Battery Charge Board similar ideas? Try to explore these searches: Jason Natural Hair Products, Rose Cardigan Sweater, and Frog Oil Lamp.

Related Battery Charge Board Video Reviews

Look at latest related video about Battery Charge Board.

Shopwizion.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.