Compare Prices

Low Power Disconnect Module


>
Low Power Disconnect Module - Galley Power LLC Low Voltage Battery Disconnect, 20A, 12V/24V Auto Detect
Galley Power LLC Low Voltage Battery Disconnect, 20A, 12V/24V Auto

Low Power Disconnect Module

The GPC-1005-R is a low voltage disconnect load switch. • It prevents battery from over-discharge by disconnecting the attached load if the battery voltage drops below a predefined threshold. • It reconnects the load when the battery is recharged. For install instructions and other details, please go to http://www.galleypower.com/store/p9/Low_voltage_disconnect.html Ten threshold options set by rotary selector • For 12V battery: 2, 9.3V; 3, 9.7V; 4, 10.1V; 5, 10.5V; 6, 10.9V; 7, 11.3V; 8, 11.7V; 9, 12.1V • For 24V battery: 2, 18.6V; 3, 19.4V; 4, 20.2V; 5, 21.0V; 6, 21.8V; 7, 22.6V; 8, 23.4V; 9, 24.2V • When switch is at 0, OFF: Disconnect power from the load. (When rotated to location 2~9, the switch will stay off until reconnect threshold is reached.) • When switch is at 1, ON: Connect power to the load if there is no pending fault. (When rotated to location 2~9, the switch will stay on until cutoff threshold is reached.) • Recessed rotary swtich for better setting protection. See GPC-1005-F for flushed rotary switch option with easy access. Features • Ultra low pass-through impedance 4.5mΩ • Ultra low standby current 0.26mA in 12V mode and 0.65mA in 24V mode • Low normal operating current 3.5mA in 12V mode and 5.8mA in 24V mode • Automatic 1...

  • Brand: Galley Power LLC
  • ASIN: B0147DYUN8
Low Power Disconnect Module - Electronics-Salon Low Voltage Disconnect Module LVD, 24V 30A, Protect/Prolong Battery Life.
Electronics-Salon Low Voltage Disconnect Module LVD, 24V 30A, Protect/Prolong Battery

Low Power Disconnect Module

Low Voltage Disconnect Module LVD, 24V 30A, Protect/Prolong Battery Life. Part number: D-1021/24V, Version 2.0 (from December-22, 2017). Mount type: panel mount. Suitable battery: 24V. Rated current: 30A. To protect electronics from damaging low voltages and prevent a deep discharge of a battery during an extended power outage, the LVD module will automatically disconnect the battery when the voltage falls below the user adjustable cutoff voltage. When power is restored the Smart Switch will automatically reconnect the battery. thereby protecting the battery from total discharge (helping to prolong the life of the battery). Applications include: Solar systems, Alarm systems, UPS systems, Mobile systems, Or any application where you need to protect the battery from total discharge. Features: Programmable voltage setting for Disconnect and Reconnect. Red-green LED indication for MOSFET switch ON and OFF. Panel mount or DIN rail mount types selectable. DIN rail mount version can support width 35 / 32 / 15mm rails.  

  • Brand: CZH-LABS
  • ASIN: B018TV7NQU
Low Power Disconnect Module - Electronics-Salon Low Voltage Disconnect Module LVD, 24V 10A, Protect/Prolong Battery Life.
Electronics-Salon Low Voltage Disconnect Module LVD, 24V 10A, Protect/Prolong Battery

Low Power Disconnect Module

Low Voltage Disconnect Module LVD, 24V 10A, Protect/Prolong Battery Life. Part number: D-1077/24V. Mount type: panel mount. Suitable battery: 24V. Rated current: 10A. The item no paper instructions, please download the PDF file, and before buying please read the file: http://www.audiowind.com/new-pdf/d1021-d1077series.pdf To protect electronics from damaging low voltages and prevent a deep discharge of a battery during an extended power outage, the LVD module will automatically disconnect the battery when the voltage falls below the user adjustable cutoff voltage. When power is restored the Smart Switch will automatically reconnect the battery. thereby protecting the battery from total discharge (helping to prolong the life of the battery). Applications include: Solar systems, Alarm systems, UPS systems, Mobile systems, Or any application where you need to protect the battery from total discharge. Features: Programmable voltage setting for Disconnect and Reconnect. Red-green LED indication for relay switch ON and OFF. 10/30 Amp version selectable, 10A/30A power relay. Panel mount or DIN rail mount types selectable. DIN rail mount version can support width 35 / 32 / 15mm rails.  

  • Brand: CZH-LABS
  • ASIN: B018TWGTT6
Low Power Disconnect Module - Electronics-Salon Low Voltage Disconnect Module LVD, 12V 10A, Protect/Prolong Battery Life.
Electronics-Salon Low Voltage Disconnect Module LVD, 12V 10A, Protect/Prolong Battery

Low Power Disconnect Module

Low Voltage Disconnect Module LVD, 12V 10A, Protect/Prolong Battery Life. Part number: D-1077/12V. Mount type: panel mount. Suitable battery: 12V. Rated current: 10A. The item no paper instructions, please download the PDF file, and before buying please read the file: http://www.audiowind.com/new-pdf/d1021-d1077series.pdf To protect electronics from damaging low voltages and prevent a deep discharge of a battery during an extended power outage, the LVD module will automatically disconnect the battery when the voltage falls below the user adjustable cutoff voltage. When power is restored the Smart Switch will automatically reconnect the battery. thereby protecting the battery from total discharge (helping to prolong the life of the battery). Applications include: Solar systems, Alarm systems, UPS systems, Mobile systems, Or any application where you need to protect the battery from total discharge. Features: Programmable voltage setting for Disconnect and Reconnect. Red-green LED indication for relay switch ON and OFF. 10/30 Amp version selectable, 10A/30A power relay. Panel mount or DIN rail mount types selectable. DIN rail mount version can support width 35 / 32 / 15mm rails.  

  • Brand: CZH-LABS
  • ASIN: B018TW0KN2
Low Power Disconnect Module - KNACRO Automatic Battery Charging and discharging protection board Anti-overcharge Low-voltage negative pressure protection [36V dedicated] (36V)
KNACRO Automatic Battery Charging and discharging protection board Anti-overcharge Low-voltage negative pressure protection [36V dedicated]

Low Power Disconnect Module

The role of the module: This module with a delay off function and can automatically restore the output function, that is, in the battery owed to the duration of 3 to 5 seconds, the module will disconnect the output, so as to avoid the start of high current load battery voltage fluctuations and errors action; When the output is turned off, if the battery voltage rises to a fully charged voltage, the battery will automatically turn on the load, disconnect and charger connection, undervoltage and full charge voltage value can be adjusted by potentiometer Set your own (setting method and attention please refer to picture). Example 1: Such as the load for the motor, start, the battery voltage will fluctuate, this can be used with a delay, delay 3 to 5 seconds enough to restore the battery voltage stability value. Example 2: When the car just started, the car lights will flash, but also because the start current is relatively large, battery voltage fluctuations, and this can be used with a delay, delay 3 to 5 seconds, enough to restore the battery voltage . Wiring should be noted: Connect the load first, then the battery, and then the charger interface. The first time the module is connected, if the battery voltage does not reach the full voltage, the load is not necessarily connecte...

  • Brand: KNACRO
  • ASIN: B01N9LL8ZK
  • UPC: 713653010578
Low Power Disconnect Module - Electronics-Salon 1PCS Low Voltage Disconnect Module LVD, 12V 10A, Protect/Prolong Battery Life.
Electronics-Salon 1PCS Low Voltage Disconnect Module LVD, 12V 10A, Protect/Prolong Battery

Low Power Disconnect Module

Low Voltage Disconnect Module LVD, 12V 10A, Protect/Prolong Battery Life. Quantity: a lot of 1 piece. Part number: F-1000/12V Suitable battery: 12V Rated current: 10A Discount voltage: 10.0V Reconnect voltage: 10.7V The item no paper instructions, please download the PDF file, and before buying please read the file: http://www.audiowind.com/new-pdf/f-1000.pdf To protect electronics from damaging low voltages and prevent a deep discharge of a battery during an extended power outage, the LVD module will automatically disconnect the battery when the voltage falls below the cutoff voltage. When power is restored the Smart Switch will automatically reconnect the battery. thereby protecting the battery from total discharge (helping to prolong the life of the battery). Applications include: Solar systems, Alarm systems, UPS systems, Mobile systems, Or any application where you need to protect the battery from total discharge. Other, about customized version: We can support customer customized order, if your order >=100 pieces, you can modify disconnect voltage / reconnect voltage / product label / logo.  

  • Brand: CZH-LABS
  • ASIN: B019F3BEIO
Low Power Disconnect Module - Altronix LOW POWER DISCONNECT MODULE - 12VDC/24VD LPD
Altronix LOW POWER DISCONNECT MODULE - 12VDC/24VD

Low Power Disconnect Module

Low Power Disconnect Module - 12VDC/24VDC input, Disconnects at 10.5 volts (12 volt setting), 20 volts (24 volt setting)

  • Color: NA
  • Brand: Altronix
  • ASIN: B002PN95BK
  • UPC: 782239932337
Low Power Disconnect Module - Electronics-Salon 1PCS Low Voltage Disconnect Module LVD, 24V 10A, Protect/Prolong Battery Life.
Electronics-Salon 1PCS Low Voltage Disconnect Module LVD, 24V 10A, Protect/Prolong Battery

Low Power Disconnect Module

Low Voltage Disconnect Module LVD, 24V 10A, Protect/Prolong Battery Life. Quantity: a lot of 1 piece. Part number: F-1000/24V Suitable battery: 24V Rated current: 10A Discount voltage: 20.0V Reconnect voltage: 21.4V The item no paper instructions, please download the PDF file, and before buying please read the file: http://www.audiowind.com/new-pdf/f-1000.pdf To protect electronics from damaging low voltages and prevent a deep discharge of a battery during an extended power outage, the LVD module will automatically disconnect the battery when the voltage falls below the cutoff voltage. When power is restored the Smart Switch will automatically reconnect the battery. thereby protecting the battery from total discharge (helping to prolong the life of the battery). Applications include: Solar systems, Alarm systems, UPS systems, Mobile systems, Or any application where you need to protect the battery from total discharge. Other, about customized version: We can support customer customized order, if your order >=100 pieces, you can modify disconnect voltage / reconnect voltage / product label / logo.  

  • Brand: CZH-LABS
  • ASIN: B019F3U5Y8
Low Power Disconnect Module - 30A Low Voltage Battery Disconnect with Alarm output, 12V/24V Auto Detect
30A Low Voltage Battery Disconnect with Alarm output, 12V/24V Auto

Low Power Disconnect Module

GPC-1015-RA is a low voltage disconnect with alarm output. • It disconnects attached load if the battery voltage drops below predefined threshold. • It reconnects the load when the battery is recharged. For install instructions and details, please go to http://www.galleypower.com/store/c3/Low_Voltage_Disconnect.html Ten threshold options set by rotary selector • For 12V battery: 2, 9.3V; 3, 9.7V; 4, 10.1V; 5, 10.5V; 6, 10.9V; 7, 11.3V; 8, 11.7V; 9, 12.1V • For 24V battery: 2, 18.6V; 3, 19.4V; 4, 20.2V; 5, 21.0V; 6, 21.8V; 7, 22.6V; 8, 23.4V; 9, 24.2V • When selector=0, OFF: Disconnect power from the load. (When rotated to 2~9, the unit will stay off until reconnect threshold is reached.) • When selector=1, ON: Connect power to the load if no pending fault. (When rotated to 2~9, the switch will stay on until disconnect threshold is reached.) • Recessed selector. See GPC-1015-RA for flushed selector option.•ALARM Max 85mA. Connect alarm device between Alarm and BATT+. Alarm is on when battery is close to disconnect voltage or in disconnect mode. Features • Ultra low pass-through impedance 2.2mΩ • Ultra low standby current 0.26mA in 12V mode and 0.65mA in 24V mode • Low normal operating current 3.5mA in 12V mode and 5.8mA in 24V mode • Automati...

  • Brand: Galley Power LLC
  • ASIN: B0147DWPBW

Low Power Disconnect Module T646 Search Results

Looking for more Low Power Disconnect Module similar ideas? Try to explore these searches: Softspots Womens Pennies, Chocolate Microfiber Sectional Sofa, and Collar Pearl Earrings.

Related Low Power Disconnect Module Video Reviews

Look at latest related video about Low Power Disconnect Module.

Electronics Salon Low Voltage Disconnect Module LVD 12V 30A ProtectProlong

Low Power Disconnect Module

Sales-priced 2ckkG4y New! Discover more categories. Shop now Electronics-Salon Low Voltage Dis...

Tags:

Low Voltage Shutdown Relay for DC to AC Power Inverters by Missouri Wind and Solar

Low Power Disconnect Module

The Low Voltage Shutdown (LVS) Relay will disconnect the DC power source from your DC to AC power...

Tags: wind,turbine,solar,panel,electricity,electric,a...

Shopwizion.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.