Compare Prices

Prince Hydraulic Pumps


>
Prince Hydraulic Pumps - Prince Hydraulic PTO Tractor Pump - 40 GPM, Model# HC-P-K11
Prince Hydraulic PTO Tractor Pump - 40 GPM, Model#

Prince Hydraulic Pumps

At 1000 PSI, direct drive hydraulic pump delivers 40.1 GPM at 1000 RPM and over 20 GPM at 540 RPM. Pump has roller bearing construction, pressure balanced self-adjusting wear plates and an internally splined drive shaft, 1 3/8in.-21 tooth, so it needs no gear box. Handles pressures up to 2250 PSI. SAE O-ring ports: inlet #20 1 5/8in.-12, drain outlet #16 15/16in.-12, plus auxiliary outlet, #12 11/16in.-12. Includes #20 SAE to 2in. hose adapter and #16 SAE to 1in. female pipe. Easy installation using torque arm restraint. Reservoir size should at least be as large as the output of the pump. Rotations Per Minute: 540, 1,000, GPM: 20, 40, Shaft Diameter (in.): 1 3/8, Max. PSI: 2,250, Shaft Type: Spline 21-tooth

  • Brand: Prince
  • ASIN: B0000AWZ51
  • UPC: 615986038079
Prince Hydraulic Pumps - Prince Hydraulic PTO Tractor Pump - 21 GPM, Model# HC-PTO-1A
Prince Hydraulic PTO Tractor Pump - 21 GPM, Model#

Prince Hydraulic Pumps

Gear-type, heavy-duty hydraulic pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump. GPM: 21, Weight (lbs.): 40, Shaft Type: Spline 6-tooth, Shaft Diameter (in.): 1 3/8, Max. PSI: 2,000, Rotations Per Minute: 540, Material: Aluminum, cast iron

  • Brand: Prince
  • ASIN: B0000AWZ1Q
  • UPC: 095992005003
Prince Hydraulic Pumps - Prince Log Splitter Detent Valve
Prince Log Splitter Detent

Prince Hydraulic Pumps

Prince Log Splitter Detent Valve for open center systems. Relief valve adjustable to 2750 PSI, preset at 2250 PSI, flow rating up to 25 gal./min. Our most popular log splitter valve. Spring centered in one direction, pressure released detent in the other direction. Automatically kicks back to neutral when cylinder completes stroke. Built-in relief valve ports. Hydraulic balanced, hard chrome plated spool. Handle can be installed in up or down position. Detent release pressure adjustable from 600 to 2000 PSI. Adjustable Release Pressure PSI: 1,000-2,000, Inlet Port (in.): 3/4, Max. PSI: 2,750, Working Port (in.): 1/2, Max. Flow (GPM): 25

  • Color: port
  • Brand: Prince
  • ASIN: B0000AX385
Prince Hydraulic Pumps - Prince Manufacturing HC-PTO-1A PTO Pump, Aluminum
Prince Manufacturing HC-PTO-1A PTO Pump,

Prince Hydraulic Pumps

PTO Drive is 6 Tooth DriveActual displacement: 9.9 CI/Rev, Porting location: Side, Center Section: Aluminum, RPM: 540A feature that contributes to the excellent and long-lived efficiency of the Prince PTO pumps is the minimum clearance between the gears and the center housing. Each pump is assemblied with zero clearance between the housing and the tips of the gear teeth, then test run until the teeth establish a proper wear path in the housing. The result is a much tighter clearance than found in traditional pumps or imported pumps.

  • Color: Gray
  • Brand: Prince Manufacturing
  • ASIN: B00IF9107U
Prince Hydraulic Pumps - Prince Manufacturing SP20B20A9H5-R Hydraulic Gear Pump, 35.73 HP Motor, 3000 PSI Maximum Pressure, 17.76 GPM Maximum Flow Rate, Clockwise Rotation, Self-Lubricating, SAE A Flange, Aluminum
Prince Manufacturing SP20B20A9H5-R Hydraulic Gear Pump, 35.73 HP Motor, 3000 PSI Maximum Pressure, 17.76 GPM Maximum Flow Rate, Clockwise Rotation, Self-Lubricating, SAE A Flange,

Prince Hydraulic Pumps

This Gear pump now utilizes self-lubricating thrust blocks that eliminate the need for separate wear plates. They are made from a high strength aluminum alloy with exceptional anti-galling properties. This new bearing features a robust fluoropolymer PTFE wear surface that yields unsurpassed load carrying capabilities and cavitation resistance even at low speeds and moderate levels of contamination. Also, since its resin layer is self-lubricating, contamination from bearing wear in high load situations (when no oil film is present) is reduced. This new thrust block design combined with these advanced bearing results in lower friction and less internal oil loss resulting in higher pump efficiencies.

  • Color: Aluminum
  • Brand: Prince Manufacturing
  • ASIN: B00IKCWTY0
Prince Hydraulic Pumps - Prince Manufacturing SP20B09A9H4-R Hydraulic Gear Pump, 21.31 HP Motor, 3000 PSI Maximum Pressure, 9.74 GPM Maximum Flow Rate, Clockwise Rotation, Self-Lubricating, SAE A Flange, Aluminum
Prince Manufacturing SP20B09A9H4-R Hydraulic Gear Pump, 21.31 HP Motor, 3000 PSI Maximum Pressure, 9.74 GPM Maximum Flow Rate, Clockwise Rotation, Self-Lubricating, SAE A Flange,

Prince Hydraulic Pumps

This Gear pump now utilizes self-lubricating thrust blocks that eliminate the need for separate wear plates. They are made from a high strength aluminum alloy with exceptional anti-galling properties. This new bearing features a robust fluoropolymer PTFE wear surface that yields unsurpassed load carrying capabilities and cavitation resistance even at low speeds and moderate levels of contamination. Also, since its resin layer is self-lubricating, contamination from bearing wear in high load situations (when no oil film is present) is reduced. This new thrust block design combined with these advanced bearing results in lower friction and less internal oil loss resulting in higher pump efficiencies.

  • Color: Aluminum
  • Brand: Prince Manufacturing
  • ASIN: B00IKCVAU4
Prince Hydraulic Pumps - Prince PTO Gear Pump PMCK-PTO-1A: Cast Iron Center Housing, Seal Kit, 205116
Prince PTO Gear Pump PMCK-PTO-1A: Cast Iron Center Housing, Seal Kit,

Prince Hydraulic Pumps

Self-adjusting wear plates both sides. Two outlet ports with plug to seal unused port. Roller bearings. Internal spline with thru-drive feature. High tensile cast iron end plates. Slips on tractor PTO (no gear box required).

  • Brand: Prince
  • ASIN: B013WYNWFU
  • UPC: 615986037676
Prince Hydraulic Pumps - Prince Manufacturing SP20B23A9H5-R Hydraulic Gear Pump, 34.54 HP Motor, 2500 PSI Maximum Pressure, 20.55 GPM Maximum Flow Rate, Clockwise Rotation, Self-Lubricating, SAE A Flange, Aluminum
Prince Manufacturing SP20B23A9H5-R Hydraulic Gear Pump, 34.54 HP Motor, 2500 PSI Maximum Pressure, 20.55 GPM Maximum Flow Rate, Clockwise Rotation, Self-Lubricating, SAE A Flange,

Prince Hydraulic Pumps

This Gear pump now utilizes self-lubricating thrust blocks that eliminate the need for separate wear plates. They are made from a high strength aluminum alloy with exceptional anti-galling properties. This new bearing features a robust fluoropolymer PTFE wear surface that yields unsurpassed load carrying capabilities and cavitation resistance even at low speeds and moderate levels of contamination. Also, since its resin layer is self-lubricating, contamination from bearing wear in high load situations (when no oil film is present) is reduced. This new thrust block design combined with these advanced bearing results in lower friction and less internal oil loss resulting in higher pump efficiencies.

  • Color: Aluminum
  • Brand: Prince Manufacturing
  • ASIN: B00IKCX8HC
Prince Hydraulic Pumps - All States Ag Parts Used Prince- Hydraulic PTO Pump 540 RPM - 21GPM Universal
All States Ag Parts Used Prince- Hydraulic PTO Pump 540 RPM - 21GPM

Prince Hydraulic Pumps

Max RPM: 540 Max PSI: 2250 Max GPM at 2000PSI: 21 Port Size In: SAE 16 1" female o ring Port Size Out: SAE 12 .75" female O ring Drive Shaft Requirement: 1-3/8", 6 tooth Gear-type, heavy-duty pump is designed for PTO drive operation on tractors of all sizes No additional gearing is required Pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump High tensile aluminum housing, minimum gear clearance, cast iron endplates To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters For a New version of this sku use 120040 For a Remanufactured version of this sku use For a premium used version of this sku use Due to the nature of used parts, this part may not be in stock at all times. We will notify you within one business day if we are unable to ship the part for any reason. All new, rebuilt and used tractor parts have a 1-year warranty

  • Brand: All States Ag Parts
  • ASIN: B071NQ931N
  • UPC: 636431460801

Prince Hydraulic Pumps I148 Search Results

Looking for more Prince Hydraulic Pumps similar ideas? Try to explore these searches: Maxim Jewel, Dale Earnhardt Paint Schemes, and Big And Tall Cotton Sweatshirt.

Related Prince Hydraulic Pumps Video Reviews

Look at latest related video about Prince Hydraulic Pumps.

Shopwizion.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.