Compare Prices

Stampede Rear


>
Stampede Rear - Traxxas 6852X 6852X Driveshaft Assembly Rear Slash 4x4
Traxxas 6852X 6852X Driveshaft Assembly Rear Slash

Stampede Rear

The Traxxas 6852X driveshaft is a direct OEM replacement for stock rear driveshafts on Slash 4x4 and Stampede 4x4 models. The driveshaft is fully assembled with screw pin and ready to install on either the left or right rear. Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

  • Brand: Traxxas
  • ASIN: B004ED61D4
  • UPC: 885284262739
Stampede Rear - RPM 80185 Rear A-Arms Blue E- Monster Jam, Rustler, Stampede
RPM 80185 Rear A-Arms Blue E- Monster Jam, Rustler,

Stampede Rear

OverviewRPM rear A-arms for the Traxxas Slash are designed specifically for the Slash - they are not multi-platform A-arms like the stock versions.Our first design challenge was to beef up our version of the Slash rear A-arms to handle some serious abuse. The material around the inner and outer hinge pins has been increased by a whopping 64%! We then eliminated all of the unnecessary holes and shock mounts that would be needed on other vehicles but not on the Slash, which significantly reduced the weight of our A-arms while improving crash durability. Even after all of the increased muscle has been factored in, our A-arms still come in at over 10% lighter than the original arms! Our final design task was to improve the fit and finish and what we came up with will eliminate most of the slop in the rear suspension system! The Slash owner can tighten things up to near perfect out back simply by adding in a set of our #80382 Rear Bearing Carriers currently available. RPM Slash rear A-arms use stock suspension geometry and include stock rear toe angles.RPM Slash rear A-arms are not only stronger and more durable than stock, they are also more rigid and less flexible too, making them the perfect addition to those race-level Slashes on the track. Additionally, the new geometry design le...

  • Brand: RPM
  • ASIN: B000KKDMFU
  • UPC: 885669861274
Stampede Rear - Atomik RC Alloy Rear Ultra Shocks, Blue fits the Traxxas 1/10 Slash 4X4 and Other Traxxas Models - Replaces Traxxas Part 3762A
Atomik RC Alloy Rear Ultra Shocks, Blue fits the Traxxas 1/10 Slash 4X4 and Other Traxxas Models - Replaces Traxxas Part

Stampede Rear

Give your Traxxas 1/10 Slash 4X4 the gift of alloy greatness with this Alloy Rear Ultra Shocks, Blue. Atomik RC has a full line of aluminum hop up parts for your Traxxas 1/10 Slash 4X4, available now in blue, red, and grey/gunmetal.Replaces Traxxas Part No. 3762A. Precision CNC Machined Hop Up Part for Factory Spec Fitment. Made from Hardened Billet 6061 Aluminum for Lightweight and Durable Performance.Fits the Following Traxxas Models: Traxxas 1/10 Slash 4X4, Traxxas 1/10 Slash, Traxxas 1/10 Stampede, Traxxas 1/10 Rustler, Traxxas 1/10 Stampede 4X4, Traxxas 1/10 Ford F150 SVT Raptor, Traxxas 1/10 Bandit, Traxxas E-Maxx, Traxxas 1/10 Nitro Slash, Traxxas 1/10 Rally, Traxxas 1/10 Monster Jam Series, Traxxas 1/10 Nitro Stampede, Traxxas 1/10 Nitro Rustler, Traxxas 1/10 Stadium Maxx, Traxxas 1/10 T-Maxx.Please NOTE - Shock oil is NOT included and is recommended prior to use.

  • Color: Blue
  • Brand: Atomik RC
  • ASIN: B00DR7CMBI
  • UPC: 845623040350
Stampede Rear - Traxxas 6852R Rear Steel-Spline Constant-Velocity Drive Shafts (Pair)
Traxxas 6852R Rear Steel-Spline Constant-Velocity Drive Shafts

Stampede Rear

Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Gleaming nickel-plated shafts and black silicone boots add a custom look. Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

  • Brand: Traxxas
  • ASIN: B0047BDV6S
  • UPC: 020334685285
Stampede Rear - RPM Rear Bumper or Wheelie Bar Mount Electric 2WD Slash, Rustler, Stampede, and Bandit, Black
RPM Rear Bumper or Wheelie Bar Mount Electric 2WD Slash, Rustler, Stampede, and Bandit,

Stampede Rear

After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, we found several issues that could use the RPM touch. Those same problems were encountered on e-Rustler, e-Stampede & Bandit vehicles using the stock wheelie bar mount. The problem – the stock mount uses only a single screw on the gear cover side to hold the mount in place. That causes a hinge effect under rear impacts causing the slotted area holding on to the rear skid plate to pop off after an impact, leaving the stock bumper / wheelie bar mount hanging under the chassis. The RPM solution An all-new bumper mounting system that eliminates all of the problems encountered with the stock version. The RPM rear bumper / wheelie bar mount has two mounting holes on the gear cover side and three on the motor side – that's two additional mounting points to eliminate that annoying hinge effect mentioned above. The additional mounting screws help disperse impact energy into the transmission case over more surface area, reducing the possibility of damaging the case significantly! The new RPM mount design means no more slotted parts hanging below the rear skid plate – ever! Our mount tucks up quite nicely behind the skid plate for better rear end ground clearance. Our rear bumper / wheelie bar mou...

  • Color: Black
  • Brand: RPM
  • ASIN: B001PJNNQI
  • UPC: 885675673397
Stampede Rear - Traxxas 3623 Front and Rear Stampede Skid Plates, Black
Traxxas 3623 Front and Rear Stampede Skid Plates,

Stampede Rear

Skid plates, front & rear (black) Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

  • Brand: Traxxas
  • ASIN: B0006O5KM8
  • UPC: 020334362308
Stampede Rear - RPM Rear Bearing Carriers for Slash E-Rustler, E-Stampede 2WD and Bandit Replacement Parts, Blue
RPM Rear Bearing Carriers for Slash E-Rustler, E-Stampede 2WD and Bandit Replacement Parts,

Stampede Rear

Identical in strength and performance as our #80375 Front Bearing Carriers, these rear carriers will get you to the finish line every time! Our bearing carriers are molded from RPM’s bulletproof blend of nylons and are guaranteed not break! Molded in black or blue. Tech Notes: 5x11x4mm. bearings are not included with these kits (4 bearings are needed for each kit).

  • Color: Blue
  • Brand: RPM
  • ASIN: B06XXP4FSV
  • UPC: 672415803851
Stampede Rear - RPM 80702 Front/Rear A-Arms Black Slash/Stampede 4x4 Black
RPM 80702 Front/Rear A-Arms Black Slash/Stampede 4x4

Stampede Rear

Key FeaturesCompatible with the Slash 4x4, Stampede 4x4 and Rally 4x4Each Arm is 6.5 grams lighter than stockOne pair of arms included for front or rear of vehicleOverviewAdd strenth while reducing weight on your Traxxas Slasy 4x4, Stampede 4x4 or Rally 4x4 with these front or rear A-arms from RPM. RPM tightened the tolerances around the hinge pins, reducing the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90%. As a bonus, RPM cut 6.5 grams of weight off of each A-arm for a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions. RPM A-arms carry over their traditional look with 30 degree leading and trailing edges and huge bosses for the shocks and sway bar mounts. RPM A-arms are molded in their trademark blend of incredibly durable nylons and are backed by an industry leading warranty.

  • Color: black
  • Brand: RPM
  • ASIN: B0039N87Q4
  • UPC: 885721718638
Stampede Rear - RPM 80705 Front/Rear A-Arms Blue Slash/Stampede 4x4 Blue
RPM 80705 Front/Rear A-Arms Blue Slash/Stampede 4x4

Stampede Rear

RPM Front or Rear A-arms, Blue: Slash 4x4, ST 4x4, RPM80705

  • Color: blue
  • Brand: RPM
  • ASIN: B0039N4ILM
  • UPC: 885121034567

Stampede Rear X681 Search Results

Looking for more Stampede Rear similar ideas? Try to explore these searches: Adjustable Headers, Indianapolis Colts Golf Stand Bag, and Brs Check Valve.

Related Stampede Rear Video Reviews

Look at latest related video about Stampede Rear.

Shopwizion.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.